The QTC window put nothing on the air on RTTY except the lines themselves,
so the operator typed the rest into the digital window's transmit pane and
copied the lines by hand. N1MM sends a message for each step and fills the
lines in from a click. Both are here now, with N1MM's messages, N1MM's
defaults and N1MM's settings behind them.
The messages, all of them settings in the QTC window's setup area:
- RX Ready, `WAERXReadyText`, `{ENTERLF}I AM QRV BK`
- All Agn, `WAEAllAgnText`, `{ENTERLF}ALL AGN ALL AGN BK`
- Agn n, `WAEAGNText`, `{ENTERLF}AGN QTC: $ $ $ `, where `$` is the line
- Save, `WAESaveQTCText`, `{ENTERLF}R R R ALL OK BK`
- R U QRV, `WAERUQRVText`, `{ENTERLF}R U QRV BK`
- Save, reading traffic out, `WAESSaveQTCText`, `{ENTERLF}GL DE {MYCALL}`
Each keys the transmitter, sends the text and drops it again, and an empty
one sends nothing. The line spacing default is N1MM's `{ENTERLF}` rather
than `{ENTER}`, which was wrong.
The buttons: R U QRV and Snd Hdr were hidden while reading traffic out on
RTTY, though that is where N1MM starts — R U QRV is the first button
pressed. All Agn is new, and so is the S button on each line, which strikes
a line through a QTC that arrived too broken to read so the rows after it
keep their places; Agn n clears the strike and asks for that line again.
Clicking a line in the digital window fills the next row, which is how the
series is copied on RTTY: the other station sends the header and all ten
lines in one transmission. A click anywhere in a line hands the whole line
to the QTC window, which reads the time, the callsign and the serial number
out of it by shape and flashes the line to show it was taken. A line that is
not a QTC is left to mean what a click always means there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0157i7PiZyqBkquxS9A6FTdQ
An operator copying a header off the air often types the series number and
nothing else. That read as a header the program could not parse, so the box
went yellow and Close refused to log the series.
N1MM fills the count in: "If he only types the batch number without the
forward slash and count, the program will assume the count is 10."
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0157i7PiZyqBkquxS9A6FTdQ
WAE gives a point for every QTC line, so an operator needs to know what is
still there to exchange. The entry window now carries N1MM's QTCinfo line in
WAE: how many QTC lines have already gone with the station in the callsign
box, how many more may go, and how many contacts are left to report to
anybody. The QTC window shows the same line.
The numbers come from the log rows, the way N1MM works them out:
- exchanged is every QTC row with that call, both directions and all bands,
and ten is the lot
- available is every contact not reported to anybody yet, without the dupes
and without the station itself, which is N1MM's QTCRecordsetCount
- what is left with the station is what is free of its ten, and no more than
the contacts there are to report when we are the one reporting
Europe on CW and SSB only takes traffic down, so its line leaves the last
number out, as N1MM's does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0157i7PiZyqBkquxS9A6FTdQ
Four changes to the QTC window, three of them N1MM's behaviour and one an
addition.
Tab, enter and space all move to the next box the operator types in, and shift
and tab move back. The walk covers those boxes and nothing else. N1MM handles
the three keys in every box itself — `QTCLinesA_KeyDown` and its two siblings,
with `PreviewKeyDown` claiming Tab — rather than leaving them to the tab order,
so the cursor never lands on a switched-off line or on a button beside one.
Tab was going to Avalonia's default walk, which covered every control in the
window.
The header now says how many lines take traffic. `QTCHeader_LostFocus` reads
the count after the last `/` and hands it to `ColorizeCWRXFields`, which enables
that many lines and switches off the rest, capped by how many of the station's
ten are still free. All ten were live whatever the header said. Nothing already
typed is cleared, which N1MM does under `DontErase`.
A time typed short is filled in from the line above as the cursor leaves the
box: `52` under `1148` reads as `1152`. `QTCLinesA_LostFocus` takes as many
characters off the front of the line above as the typed part is missing, and
drops a colon whatever the length. `QtcTraffic.FillTime` is that rule.
The addition: while the cursor is in a QTC callsign box the check window
answers for that call rather than the entry window's, so a call taken down in
traffic is checked the same way one being worked is. `CheckWindowSources`
takes the call from `Elsewhere` when the QTC window has set it.
Checked by driving the window: header `4/5` left five lines live and read
"1 of 5", tab walked header to time to call to serial to the next line's time,
shift and tab walked back, `52` on the second line became `1152`, and the check
window listed W1AW while `W1A` was typed in a QTC line.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015NZkFxHde1iifAQemFTHxf
The score summary now splits the way N1MM's does. `ContestLog` keeps a tally
per band, and per kind of row where the contest has kinds, and the score window
reads those instead of adding the rows up itself. Three things were wrong with
the old sum:
- The band rows counted a multiplier as one whatever the band. WAE weights it
by band — `ScoreRow.AddContact` adds four on 3.5, three on 7 and two on 14,
21 and 28 — so the band rows did not add up to the total.
- The band rows counted contacts left out of the claimed score.
- There was no split by kind. `CWAE.LogInfo` and `ScoreClass.Description` give
WAE a `Q/QTC` column and a row per band and kind, so contacts, traffic sent
and traffic received are read apart.
The Cabrillo writer now pads the record name to seven characters, which is what
`ConvertCabrilloStructStdToString` does and why: `X-QSO:` is six characters and
a space, so every record name puts the frequency in the same column. Nonemm
wrote five, and the `X-QSO:` lines added last commit did not line up with the
rest.
WAE's own layouts follow `CWAE.CabrilloString`: three spaces after the sent
serial rather than the one every other column gets, and the transmitter column
only for a multi-operator entry.
`QtcTraffic.ToSend` no longer offers a contact marked as a dupe, which is what
`DBSupport.QTCRecordsetCount` leaves out with `Trim(ContactType) = ''`.
Checked by running the program against a WAE SSB log of six contacts and a
series of ten received: the band rows read 4, 3, 2 and 2 and add up to the 11
in the total row.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015NZkFxHde1iifAQemFTHxf
The menu tree comes from N1MM's EntryWindow.Designer.cs: File, Edit, View,
Tools, Config, Window, with the items under the names N1MM gives them. The
window list moved out of View into Window; the call history file moved from
Config into File > Import. Ctrl+W, Ctrl+L and Ctrl+M now work, so the keys
printed in the menu are real. Two commands that had no menu item before:
the CW and SSB function key definitions, and the QTC setup area.
The rest of the Edit menu:
- Ctrl+N asks for a note and puts it in the comment of the contact in the
boxes, or of the last logged contact when nothing is typed.
- Edit Current Contact opens the Edit Contact form over what is typed but
not logged. Update hands the values back to the entry boxes.
- Ctrl+Q and Ctrl+A load a logged contact into the boxes and paint them
pale yellow. Enter writes the change back, Esc puts back what was being
typed, and stepping forward past the newest contact leaves quick edit.
- Ctrl+U raises the received serial, or a numeric exchange box when the
contest has no serial.
- Ctrl+F shows the call being typed in the log window, then the next
contact with that call.
RadioPosition is now OperatingPosition: it is the operator at one radio,
not a place on a band.
Looked at under Xvfb on a 3775-contact log: quick edit back and forward,
Esc, the note dialog, find, and Edit Current Contact putting a zone back
into the entry boxes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
N1MM keeps them on a Setup tab inside the window; here they are a dialog behind
a right-click, which suits a window this size better. Four of them, with N1MM's
own defaults: how many QTCs a series carries, whether the RX Ready and Cfm steps
are stopped at on the way through, and whether Hdr Agn and Agn clear what they
are asking for again.
Each one changes what the window does. The series count is passed to the search
for contacts worth reporting, the two skip settings are the focus order, and the
two clear settings are what the Agn buttons do. The Cfm buttons also disappear
when a RTTY station is reading its own log out, which is what N1MM does with
them.
N1MM's remaining QTC settings are all about putting traffic on the air — the CW
messages for Agn and TU, the field spacing, the four SSB recordings, the RTTY
templates — and nothing here transmits, so they are left out rather than shown
as settings that do nothing. The dialog says so where the operator will look.
The right-click menu needed a background on the panel to come up anywhere but
over a control: a panel with no background is not hit-tested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ctrl+Z opens the QTC window for the station being worked, which is the key N1MM
puts it on, and the window is laid out the way N1MM lays it out: the header,
ten lines of time, callsign and serial number, an Agn and a Cfm button beside
each, Clear, Close and Cancel underneath, and the same colours — green for a
line that will be saved, red for one still empty, yellow for one that cannot be
read. Enter and Tab move forward and space moves within a line, so a line can be
walked while listening to it.
Sending, the lines are filled from the log and cannot be edited: the contacts
not reported to anybody yet, oldest first, never the station being worked, and
never past the ten any station may have. The rule for what has been reported is
N1MM's — a contact counts as reported when a QTC row carries its call and the
serial we sent it — so the pair is kept in the row the way N1MM keeps it.
Which way traffic goes is not the operator's choice on CW and SSB: Europe
receives and the rest of the world sends. On RTTY it goes both ways, and there
the window carries a switch. That is the one piece of the workflow that is ours
rather than N1MM's, which toggles a QTC mode outside the window instead.
Nothing here transmits. N1MM sends the lines on CW and RTTY and plays recorded
voice messages on SSB; we have no QTC message templates, no voice keyer and no
digital window, so Agn, Cfm and RX Ready move the cursor and the operator sends
by hand.
Running it caught what the tests could not: focus set in the constructor does
not stick, so the first thing typed into a freshly opened window was dropped and
every field after it took the value of the one before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
erikbrockoandClaude Opus 5