N1MM blocks the transmitter when a multi-operator entry is about to break
its own class. This program does not touch the transmitter: a logger that
decides for itself when the operator may not send loses a contact every
time it is wrong, and it is wrong whenever it has stale information about
the other stations — which, on a network, is whenever a laptop has just
been unplugged.
So the entry window says so instead. While this station is transmitting
and the entry is over what it is allowed, a red box goes across the top of
the window naming the station and the band. It is above the frequency and
under the menu, so nothing it covers is anything the operator needs while
he is sending, and it is big enough to read from the other side of the
room.
`TransmitRules` is what it asks:
| Entry | Allowed |
|---|---|
| one transmitter | one signal |
| two transmitters | two signals, on different bands |
| anything else | one signal per band |
Two on one band is wrong in every multi-operator class, so it is checked
whatever the category says. A station that has not said which band it is on
counts as somewhere else: a guess there puts the box in front of an
operator doing nothing wrong.
This is also the first thing that sends `XMIT`. The message was written and
nothing called it, so the transmit column of everybody's network status
window stayed empty and no station knew when another was sending. The entry
window now says when its key goes down and what it is sending.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PdAYHcdRktqKry7nk414TU
Three pieces on top of the link:
**The network status window**, on the entry window's Window menu. A row
per station, this computer included the way N1MM shows it: number,
address, operator, band, mode, run, transmit, pass frequency, the last
message type, how long ago it arrived, the counts each way and the echo
round trip. A station that broadcast the wrong version is named under the
table in red — that is the one fault where everything looks connected
and nothing arrives. The box at the bottom sends a line of chat, and
Echo asks every station whether it is there.
**Where this station is** goes out once a second when it has changed.
The frequency, the mode and run have a dozen places they can change from
— the radio moving, a band button, a QSY typed into the callsign box —
so it is read and compared rather than announced from each of them.
**The ten-minute rule.** `BandChangeRules` already counted changes and
the stay on a band, and the entry window already showed the countdown,
but only a user-defined contest carried a rule, so every built-in
contest allowed anything. `ForCategory` gives a multi-operator entry
with one or two transmitters a ten-minute stay, which is N1MM's fallback
in `ContestInstance.BandChangeTimerDuration` for every contest that does
not name its own. Its per-contest table is a few hundred cases in a
decompiled hash switch and is not repeated.
Config ▸ Edit Networked-Computer Names now covers both networks: the
12060 broadcast to other programs and the 12070 link, with the station
number, the port, the version to claim and stations named by address for
a network where a broadcast does not reach.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PdAYHcdRktqKry7nk414TU
Ctrl+O asks who is at the radio, as it does in N1MM, and the callsign goes on
every contact logged from then on. A multi-operator station changes hands every
few hours, so each operator also keeps what he wants the program to look like:
where the windows sit, the theme, and the folder his recordings are in.
The windows on the screen are stored against the operator leaving, before the
dialog opens, and the operator taking over gets his own back. A window he opens
later is placed as it appears. An operator who is new to the list starts with
whatever is on the screen.
Nothing plays the recordings yet, so the folder is stored and waits on voice
keying. {OPERATOR} in a message sends the callsign.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
Window > Grey Line opens the world with the night on it. The dark area is
where the sun is down, and the band along its edge is the twilight from the
horizon to six degrees below it, which is the grey line an operator watches
for on the low bands.
Grayline works out where the sun stands: the subsolar point, the elevation at
a place, and the latitude the terminator crosses a meridian at, which is what
the map fills the night between. It is the same question SunTimes answers from
the other end, and the two are checked against each other in the tests.
The coastlines are Natural Earth's 110m coastline, public domain, cut to a
tenth of a degree.
Our own station is drawn from the grid square, the station being called and
the spots on the band from the country file. The map follows the clock.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
MMTTY and 2Tone have no socket or pipe interface: N1MM hosts XMMT.ocx and
exchanges window messages with the engine. A Linux process cannot load that
control, so bridge/nonemm-mmtty-bridge.exe hosts it under Wine and passes
lines over its standard input and output. docs/digital-bridge.md states the
protocol and what the control needs.
The window is N1MM's: receive pane with coloured callsigns, grab list, call
stacking, twenty-four macro buttons and the engine controls. One left click
copies what is under it — a callsign to the callsign box, anything else to the
exchange box the contest keeps for that kind of value.
Config > Digital registers XMMT.ocx in the Wine prefix on its own, making the
prefix first if it is not there. The engine, the bridge and the control start
at the copies shipped beside the program.
The bridge reads the control's own events. OnTranslateMessage carries only the
messages the control has no event for, so nothing was ever decoded through it.
hamlib's data mode names read as digital modes now, and a mode typed into the
callsign box changes mode the way a frequency changes band, so a station with
no radio can reach RTTY at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
SOBandChangeTimerDuration and MOBandChangeTimerDuration say how long a
station has to stay on a band it has just moved to. Both were read by
nothing: N1MM counts them down in its info window, which this program
does not have.
The countdown now stands in the entry window's status bar, next to the
contacts and multipliers, ticking with the clock that is already there.
BandChangeRules.StayLeft works it out from the log, starting the stay at
the minute after the contact that changed band, which is where N1MM
starts it.
Which contests show it is decided at runtime rather than by a list: the
rules come from the contest for the entry's own category, so a file that
asks for no stay, or asks for one only of single-op entries while the
station is entered multi-op, shows nothing at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
Three parts, as N1MM has them: what just happened on the left, the contacts
and multipliers in the middle, the score on the right.
The left says where the call being typed is from, in N1MM's own shape:
OM: EU -> Slovak Republic, Zn 15. The zone is the one the contest counts in, so
Contest.UsesItuZones answers that the way N1MM's ZoneType does, and IARU
overrides it. A message from something the operator just did stands there until
the next keystroke.
The middle is N1MM's breakdown: the contacts and then one number per multiplier
the contest counts, separated by slashes, and No Score before the first
contact. Points are not in it, because they are not in N1MM's; the score window
has them.
Those numbers were in the line at the top of the window, which now carries the
contest name alone, and the country was in the bar under the callsign box,
which now says only what working the call would bring. Neither is said twice.
Looked at under Xvfb: the country line for OM3KFF and then G4AB, 10/7/8 and
300 beside them, and a Mark message standing in the left until the next
keystroke.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
Both put something on our own bandmap and nothing on the cluster, which is
what separates them from Spot It.
Mark, Alt+M, leaves a mark where the radio is to say the frequency is busy.
The label is N1MM's, Busy@ and the time. It is not a station, so Spot carries
IsStation: nothing judges it, the check window does not offer it as a call,
available mults and Qs leaves it out, space does not take it into the callsign
box, and the bandmap paints it like a station already worked, which is how
N1MM marks it. The station count under the bandmap counts stations.
Store, Alt+O, puts the call being typed on the bandmap at this frequency so it
can be worked later. N1MM writes "Local spot" in the comment and this does the
same.
The action row now holds the eight buttons N1MM has, in N1MM's order and at
N1MM's widths: 23 per cent to Esc: Stop and 11 to each of the rest.
Left out of Store: N1MM also adds the call to what the check window's Master
column offers for the rest of the session. The call is on the bandmap, which
the check window already reads, so it is offered either way.
Driven under Xvfb: Alt+M leaving BUSY@22:32:27 on 14000, Alt+O storing
SP9XYZ there, and both drawn on the bandmap in the worked colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
A CQ is answered by more than one station. N1MM lets the operator put the
others on a stack and work them one after another; this is that, with N1MM's
keys and macros.
Ctrl+Alt+G and {STACKANOTHER} put the call being typed on the stack and clear
the boxes. Alt+G brings the top call back. Alt+D drops it. {SOCALLSTACK} both
stacks and unstacks in one key: it swaps the typed call for the top one, stacks
it when the stack is empty, and takes the top call when the boxes are.
{LOGTHENPOP} and {LOGTHENNEXT} log the contact and bring the next caller in.
{CLRSTACK} empties it.
The rules are N1MM's, and CallStack and the entry actions hold them without a
window, so they are unit-tested: stacking only while running, nothing shorter
than two characters, no dupe, no frequency typed into the callsign box, a call
already on the stack moved rather than repeated, and a multiplier to the front.
{SOCALLSTACK} takes the stacked call off before it puts the typed one on, so a
multiplier just typed cannot come straight back.
Two places differ. N1MM refuses your own call only while the stack is empty;
it is never a station to work, so it is refused either way here. And the order
is multipliers first in every mode: N1MM's digital window offers first-in and
last-in as well, and there is no digital window here.
The stack window opens by itself with the first call and closes with the last,
or Window > Call Stack opens it. It does not take the keyboard when it opens,
because the operator is typing the next call. The next call out is ringed and
each is coloured by what working it would bring, as in every other window.
OperatingPosition.JudgeCall now answers what a call alone is worth, which the
stack window and the check window both need; it was private to the check
window before.
Driven under Xvfb: four calls stacked with Ctrl+Alt+G and listed in the window,
Alt+G bringing the top one into the boxes, Alt+D dropping the next.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
The twelve function keys were one row of twelve at the bottom of the window,
with the action row under them. N1MM puts both between the entry boxes and the
bearing line, six keys to a row in two rows, each row filling the width.
The action row takes N1MM's widths as well: 23 per cent to the first button and
the rest shared out. N1MM gives the remaining seven 11 per cent each; there are
five here, because Mark and Store are missing, so they share the same 77.
Looked at under Xvfb against the N1MM screenshot: same two rows of six, same
action row under them, same order down the window.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
N1MM's band panel is a row per band and a column per mode the contest runs,
with every cell painted by what the callsign being typed would be worth there:
red for one new multiplier, green for more than one, blue for points, grey for
a station already worked on that band and mode. With nothing typed every cell
is grey. That is the panel's point — it says where a station is still needed
without working the bands one at a time — and this had only the frame.
BandPanel holds the rule and is unit-tested without a window. The bands are the
six contest bands, with 30, 17 and 12 metres added for general logging: in N1MM
that is the one entry of the hundred and thirty-five that shows the WARC bands,
so Contest.ShowsWarcBands says so and GeneralLogging overrides it. The columns
are the modes the contest runs, so CQ WW CW has one column and IARU has two,
rather than always showing CW and phone. A digital entry gets one DIG column
where N1MM has RTTY and PSK: dupes and points here go by mode category, and
those two are the same category.
The labels are N1MM's: the metres alone up to 10, then the unit from 6m up. The
band the radio is on is ringed rather than filled, as N1MM rings it, so the
ring does not hide the colour underneath. The cells are labels with a click
handler rather than buttons, so the theme cannot paint over the colour under
the pointer.
Text on a filled cell is black or white by N1MM's rule: light is the three
channels adding up to more than 384.
Looked at under Xvfb in CQ WW CW: one CW column, six bands, grey with nothing
typed, and with a JA typed red on every band but 20, where the zone and country
are already claimed, and which carries the ring.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
Colours came from static brushes scattered over the windows. They now come
from a Theme, and everything that paints a station, a spot or a log row
asks Themes.Current as it paints, so changing the theme changes every
window without reopening it.
light is N1MM's own palette, read out of ApplicationStyles: the pale blue
behind a window, ivory on a button, white boxes, and the four colours a
station is painted in. dark is the same states in colours for a dark
screen, which is roughly what the program looked like before.
Config > Manage Skins, Colors and Fonts picks one, under N1MM's name for
the same dialog, and shows what each theme paints a callsign. The choice
is kept in settings.json as Theme, and light is the default.
The window chrome follows through resources the Fluent controls read, so a
text box and a button take the theme's colours in every state. Fonts and
skins are not part of it.
Looked at under Xvfb in both themes: the entry window, the theme dialog,
and the log window with its rows still coloured by what each contact was
worth.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The menu tree comes from N1MM's EntryWindow.Designer.cs: File, Edit, View,
Tools, Config, Window, with the items under the names N1MM gives them. The
window list moved out of View into Window; the call history file moved from
Config into File > Import. Ctrl+W, Ctrl+L and Ctrl+M now work, so the keys
printed in the menu are real. Two commands that had no menu item before:
the CW and SSB function key definitions, and the QTC setup area.
The rest of the Edit menu:
- Ctrl+N asks for a note and puts it in the comment of the contact in the
boxes, or of the last logged contact when nothing is typed.
- Edit Current Contact opens the Edit Contact form over what is typed but
not logged. Update hands the values back to the entry boxes.
- Ctrl+Q and Ctrl+A load a logged contact into the boxes and paint them
pale yellow. Enter writes the change back, Esc puts back what was being
typed, and stepping forward past the newest contact leaves quick edit.
- Ctrl+U raises the received serial, or a numeric exchange box when the
contest has no serial.
- Ctrl+F shows the call being typed in the log window, then the next
contact with that call.
RadioPosition is now OperatingPosition: it is the operator at one radio,
not a place on a band.
Looked at under Xvfb on a 3775-contact log: quick edit back and forward,
Esc, the note dialog, find, and Edit Current Contact putting a zone back
into the entry boxes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things you could not see or could not set.
Run and S&P were a label saying which one you were in. They are two buttons
now, the one you are in marked, either one clickable, which is what N1MM has.
Ctrl+? and F1 still work.
The tuning tolerance is one number per mode, as N1MM keeps it: CW, phone and
digital, 300 Hz each, which are its defaults. A phone signal is wide and a CW
one is not, so one number for both was wrong.
The bearing line went blank whenever it could not be worked out, which looks
exactly like a missing feature. It now says which end could not be placed and
what to do — no country file, no position for your own station, or a callsign
the country file does not place. It also gives miles beside the kilometres, as
N1MM does.
While clicking it: a marked button lost its mark under the pointer, because the
theme paints its own background there. The band buttons had the same fault.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The call frame. Above the callsign box, N1MM writes which spotted station the
radio is sitting on, coloured like the bandmap colours it, or CQ-Frequency when
this is the frequency the last CQ went out on. Space with an empty callsign box
takes the call out of the frame and into the box, but only while searching:
TabPressed does that when the run box is unchecked, because a running station is
answering callers rather than chasing the one under its VFO. How close counts as
sitting on it is N1MM's tuning tolerance, 300 Hz, now a setting.
Sh/dx while unassisted. TelnetClient.Output refuses any command holding SH/DX
when the entry is not assisted, and the telnet window does the same now.
Whether an entry is assisted follows N1MM's own rule: assisted, multi-operator
or checklog may use spots, a single operator who did not say assisted may not.
The node's flavour. Click_LogonButton reads DXSpider, AR-Cluster, CC Cluster or
GoCluster out of the banner; ClusterClient reads the same words and the window
shows what it found. It changes nothing yet — the commands it would change are
ones this does not send — but the node says so and now we know.
CQ WW RTTY's state box. NextTab only stops on SectionText when the station is
US or Canadian, because nobody else sends a state, so a contest can now say a
box is not for this station and the walk steps over it. The box is still there
to type in.
The telnet button editor shows as many buttons as are defined, with an empty row
to write the next one in, rather than N1MM's twelve.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three more things off the screenshot of N1MM's entry window.
A Name box and a Comment box beside the exchange. Neither is part of the
exchange, so an empty one does not hold up a contact and ESM does not wait for
it; both fill the log columns of those names, and a contest that exchanges a
name keeps what was exchanged. Tab now walks the callsign, the exchange, the
name and the comment before coming round again, which is what the boxes being
there implies. The name is filled from the call history file, and what that file
says in its UserText column is written under the entry boxes, where N1MM writes
it.
Two lights beside the run switch: green while a radio is answering, red while
something is going out on the air. The transmit light follows the keyer, so with
cwdaemon it goes out when the message has actually finished rather than when the
text was handed over.
The window is wider to fit the two new boxes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The title bar said Nonemm. It now says what N1MM's says: the frequency, the
mode, whether the frequency came from a radio or was typed, and which radio the
window belongs to when there are two. Reading it off the taskbar is the point.
Under the function keys is N1MM's second row: Esc: Stop, Wipe, Log It, Edit,
Spot It and QRZ. Each one does what its key already did, so the keys and the
buttons cannot disagree. QRZ opens the callsign's page in a browser, and says so
in the status line when there is no browser to open.
Mark and Store are left out. They stack callsigns, and call stacking is not
here, so a button that did nothing would be worse than no button.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
N1MM has two columns of band buttons beside its entry window, CW in one and
phone in the other, with the band the radio is on marked. This has the same.
A button does not jump to the band edge every time: BandMemory keeps the
frequency the operator was last on for each band and mode, so leaving 20 metres
at 14032 and coming back lands on 14032. The first visit to a band starts where
that part of it starts, which the band plan says — the bottom edge for CW, the
CW-to-phone boundary for phone — and a band the plan says nothing about starts
at its bottom edge.
Phone picks the sideband the band calls for, so 40 metres is lower sideband and
20 is upper.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
N1MM writes a line under its entry window with the beam heading, the heading the
long way round, the distance and the sun times at the other end. This writes the
same line.
SunTimes is the published sunrise equation, with the usual -0.833 degrees for
the sun's radius and refraction at the horizon, and it returns nothing on the
days inside the polar circles when the sun does not rise or set. It agrees with
published times for London at both solstices, Sydney in June and the equator at
the equinox, to within three minutes.
StationPath picks the position: the grid square when the contest exchanges one
and it has been copied, then the call history file, then the country file, which
puts the station in the middle of its country. That is close enough to point a
beam with. Our own end comes from the station grid square, or from the country
file for our own call.
One thing to know when reading the times: they are that station's own sunrise
and sunset in UTC, so for Japan the sun rises late the evening before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ESM is how most people run N1MM, and it was not here at all — not in the code,
not even in the list of what is missing. Config ▸ ESM turns it on and it stays
on between runs.
The decision is a table in N1MM's function-key documentation, and it is written
here as one: the state of the callsign and exchange boxes, whether the station
is running or searching, and whether the call and the exchange have gone out
already, give the function keys Enter sends and whether the contact is logged
after them. Esm.Decide is that table and nothing else, so it is tested against
every row rather than by clicking.
Searching: type a call, Enter sends your call, space moves to the exchange, and
once the exchange is filled in Enter sends yours and logs. Running: Enter calls
CQ, a call in the box makes Enter send his call and the exchange, and the next
Enter ends the contact and logs it. A dupe gets QSO B4 while running and nothing
while searching, unless dupes are worked, which is what N1MM recommends and what
this does out of the box. F1 puts a searching station into run mode.
The entry window highlights the keys Enter would send next, so what is about to
happen is on the screen rather than in the operator's head. `=` sends whatever
Enter last sent. Escape and F12 put ESM back to the start of a contact.
Send Corrected Call is in as well: copy SM3AB, send it, fix it to SM3ABC, and
the message that ends the contact goes out as "SM3ABC TU DL1ABC". That is why
N1MM's documentation says to put ! in F5 rather than {CALL}, so the default F5
message is now ! . F6 is QSO B4, which is the message ESM sends a dupe; it used
to repeat the exchange, which no part of the table asks for.
{EXCHSENT} means something again, now that there is an ESM state for it to set.
Worked end to end against a fake cwdaemon: a search-and-pounce contact logged in
four keystrokes, a run contact in three, both with the right text on the keyer
in the right order, and the corrected call in front of the last message.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The packet window showed traffic and took a command line, and everything else
about the cluster lived in a dialog under Config. It is now the window N1MM has,
with the same five tabs.
Telnet shows the traffic with spot lines in green, what went out in blue and
lines from a preferred spotter in bold. Double clicking a spot line, or "Jump to
this spot", puts the radio there with the call in the entry window. Scrolling
stops while the pointer is over the traffic. The client keeps the last two
hundred lines, so a window opened mid-contest is not blank.
Clusters keeps the operator's nodes with their ports, passwords and after-login
commands, connects and disconnects, and holds the logon settings. Download
fetches the published list of telnet nodes from NG3K — around fifty, with the
sysop's call and a note about each — and clicking one fills the boxes in. N1MM
downloads its list from its own web service, which asks the operator to opt in
to data collection and is N1MM's to run, so this reads a public page instead.
ClusterList takes any page with telnet:// links in a table; a page it cannot
read leaves the stored list alone.
Filters decide which spots reach the bandmap: bands, modes, beacons, busted
calls, stations outside the call history file, blacklisted spotters and calls,
spots from outside your country, continent or a list of prefixes, and how long a
spot stays on the map. A busted spot is a call the callsign database has never
heard that is one character away from one it knows; a call nothing resembles is
kept, because that is what a new station looks like. Nothing is filtered out of
the traffic itself — the operator sees everything the node sends.
Buttons edits the twelve command buttons. A button takes what N1MM's takes: the
message macros, several commands separated by semicolons, or {CONN} and the name
of a favourite, which connects to that node instead of sending anything. The
label takes the macros too. Right-clicking a button opens the editor.
Config ▸ Cluster now opens this window on the Clusters tab rather than a dialog
of its own, which is where N1MM keeps those settings.
Three things that could take the program down while a cluster was connected:
Settings.Load read a null where the property is not nullable. A file that names
a key with a null value — one written before the property existed and then
edited — put that null straight through, because the property's own default only
runs when the key is missing. Opening the telnet window then threw on the first
list it touched. Every null is now put back to the default the property
declares, walking into the stored records and the lists of them.
Bandmap was written from the cluster's thread and read from the window's, so a
dictionary could be modified while a window enumerated it. Every method locks
now.
ClusterClient disposed its token source while its own loop still used it, and
the retry delay sat outside the catch, so a disconnect faulted the loop task.
Along the way the message macros were checked against N1MM's function-key
documentation, and several were wrong. {LOGGEDCALL} is N1MM's {LASTCALL}, the
serial is #, and there is no {MYZONE}; {NAME} and {GRIDSQUARE} stand for the
other station's name and grid, not ours; {OTHERMHZ} is the radio the operator is
not on. The single-character macros * and ! were missing. Added from the same
table: {LASTCALL}, {PREVNR}, {NAMEANDSPACE}, {CHNAME}, {GRID}, the two grid
bearings and the grid distance, {FREQ}, {FREQROUND}, the other-radio
frequencies, {TIMESTAMP} and {TIME2}. Frequencies are formatted the way N1MM
formats them, with R for the decimal point on CW. The macros that pass a station
to the other band take the second radio as a new argument, and stand for nothing
at a one-radio station.
Left out, and written down: saving spots to a database, which N1MM keeps in its
admin database rather than in the log file the two programs share; the
special-calls list; the two-character busted check, which is a few hundred
thousand lookups per spot against a few hundred for one character; and N1MM's
action macros, which need a different shape than an expander that returns a
string.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Behind the bandmap scale, the CW part of the band is one shade and the phone
part another, with a third for a digital block. That is what N1MM's graphical
bandmap does: ResizeBandPanels puts a CW, a Digi and an SSB panel behind the
scale, sized from its CWBands, DigiBands and SSBBands tables. Anything past a
band edge is shaded red, which is the only place the edges themselves show, and
it only appears now that the slice can reach past an edge.
The defaults are N1MM's: CW ends at 1840, 3600, 7125, 14150 and so on, and the
digital pair is empty until somebody fills it in, exactly as N1MM ships. They
are one worldwide set rather than one per ITU region, which is also N1MM's
answer — the reason recorded for leaving this out, that the segments differ by
region, was wrong about what N1MM holds. 60M and everything above 2M get no
entry, because N1MM's own numbers there contradict themselves: its 1.25M CW top
is below its phone start, and its 70CM CW top is above the band.
Config ▸ Sub bands edits them, one row per band in kilohertz, with a Defaults
button. Only the rows that differ are written to the settings file, so a plan
nobody has touched leaves nothing behind. BandPlan is an object rather than a
static table, so the stored changes layer over the defaults and the bandmap
picks up a save without a restart.
The numbers are a drawing aid, not a licence. Nothing stops a contact being
logged either side of a boundary.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Available Mults and Qs window: a column per band, the multipliers at the top
of each column and then the stations that are only points. Clicking one puts the
radio there with the call in the entry window, the same as the bandmap does.
Every spot on the bandmap goes through ContestLog.Judge, and what comes back a
dupe is dropped, so the colours and the ordering agree with every other window.
A spot holds a callsign and a frequency and nothing else. For CQ WW that gives
the country multiplier, which is derived from the call, but not the zone, which
is what the other station sends. Where a call history file has an entry for the
call its exchange is filled into the candidate first, so a published CQZone
column brings the zone in and a Sect column makes Sweepstakes work at all.
Filling the zone from the country file instead was rejected: it is wrong for
every large country, and a multiplier that is not there is better than one that
is not real.
A spot has no mode either, so the candidate is judged in the mode the radio is
in. In a mixed-mode contest that means the answer follows the operator.
RadioPosition kept two private mappings — exchange value into a contact, and
call history field into an exchange box — and both are needed here, so they move
to ExchangeSlots and both callers share them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
N1MM's format, so a file published for a contest is read as it is: # comments,
!!Order!! naming the columns of the lines after it, semicolons in preference to
commas so user text can hold a comma, and a default column order for a file
that names none. The directives that change what is stored are acted on;
!!Order!! can appear again part way through, because these files are usually
several files stuck together.
Leaving the callsign box fills what the file knows into the exchange boxes that
are still empty. A box with something in it is left alone: what the station
actually sends beats what somebody published months ago. The zone comes from
the CqZone or the ITUZone column depending on which the contest asks for, and a
file with no Sect falls back to State.
The check window's two missing columns are in. History lists matching calls
from the file. Exchange is not about callsigns at all: it offers the values the
exchange box with the cursor in it can hold, which is what N1MM's exchange pane
does — it searches the contest's list of valid exchanges, not the log.
CheckCandidate.Call is now Text, because an exchange value is not a call.
The section-validating directives are read and passed over rather than acted
on. Acting on them means holding N1MM's section lists and its rules about
retired sections, and getting that wrong throws away good data.
Running it caught what the unit tests could not: the exchange was filled and
scored but the boxes on screen still looked empty, because nothing resynced
them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
LoggingSession mixed two things: the contest, which one station has one of,
and what the operator is typing, which belongs to a radio. It is now
ContestSession and RadioPosition. Two positions share one log, one score and
one run of serial numbers, so a station worked on radio 1 is a dupe on radio 2.
Frequency, mode, split, what is typed and whether you are running belong to
each radio on its own.
A second radio opens a second entry window. It has no menu of its own: it is
another view of the same contest, not another program. Only the window for
radio 1 opens the database and the connections.
Ctrl+Tab moves the operator to the other radio and the keyboard follows.
Ctrl+Shift+Tab puts both radios in the headphones.
OtrspBox speaks OTRSP to an SO2R box over a serial port: TX1/TX2 for the key,
RX1/RX2 and RX1S for the headphones, AUXnnn for an output line. It follows the
active radio, and every message points the box at this radio before keying, so
a message cannot go out of the radio the operator has just left. A command that
would change nothing is not sent, because the box works relays; N1MM does the
same. The box takes a Stream, so what it sends is tested without a serial port.
Still missing: alternating CQ, and voice keying on the second radio.
Looked at under Xvfb with two fake radios, one of them split: both windows up,
radio 1 showing 14008.00 into 14020.0, radio 2 on 14030.00, Ctrl+Tab moving the
keyboard between them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The old client read the socket with a StreamReader, so the option negotiation a
node sends on connect landed in the text as control bytes and made a mess of
the first lines. TelnetStream now answers it: it agrees to ECHO and
SUPPRESS-GO-AHEAD, refuses everything else, swallows subnegotiations, and
tracks what it already answered so the two ends do not reply to each other for
ever. A command split across two reads is still understood, because a socket
hands over whatever has turned up rather than whole messages.
LineAssembler keeps the tail that has no line ending yet. Nodes write their
login prompt as "login: " with nothing after it, so the old ReadLineAsync sat
waiting for a line that never came and only got through because the greeting
happened to mention a matching word.
Login now follows N1MM: it looks for LOGON, ENTER CALL, LOG IN and the rest,
and sends the callsign anyway after ten seconds if no prompt turns up. A
password is sent when the node asks for one and the operator configured one.
The commands go out after that, not straight after the call. A connection that
has heard nothing for four minutes gets a blank line so the node does not drop
it as idle.
The old prompt check matched "call" anywhere in a line, which any spot comment
could trigger.
SendSpotAsync sends the node's dx command. Alt+P, or Edit / Spot It, spots the
call being typed at the current frequency, or the last contact logged when
nothing is typed, and puts it on our own bandmap without waiting for it to come
back round from the node.
The spot parser now takes a line with no colon after the spotter, and finds the
time when DXSpider has put the spotter's grid after it.
The cluster tests run over a real socket against a node fake that sends the
negotiation, the prompt and spot lines.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ctrl+Y from the entry window, or Enter on a row in the log, opens the whole
contact in one dialog. It reaches the fields the log has no column for: QSX
frequency, name, QTH, comment, grid, power, radio number, run position, and the
country and WPX prefixes. Previous and Next walk the log without closing and
offer to save first.
The dialog checks values through the same QsoEditor the log columns use, so a
zone the contest will not take is refused the same way in both places.
QsoEdit now names the field that was refused, so the dialog can put the cursor
back in the right box, and QsoEditor.ApplyAll changes several fields at once.
Points and the multiplier flags are shown but not editable. They are worked out
from the rules every time the log changes, so a typed value would be lost on
the next edit. N1MM lets you type them; we do not, rather than offering a box
that does nothing.
A contact's own country prefix now wins over the country file when scoring.
Without this, correcting the country in the dialog would change what the log
shows and what Cabrillo says, but not the score.
LoggingSession.Update now broadcasts the change like Edit does, so a contact
saved from the dialog reaches the other stations.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The function keys send through cwdaemon or a WinKeyer, with N1MM's message
macros. Escape stops sending.
Settings are read with the reflection serializer rather than a generated one:
the generated one hands back null for every property the file leaves out
instead of the value the property is declared with, which crashed the program
the first time a new setting was added.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The entry window types contacts and colours them as they are typed; the log,
check, bandmap, score and packet windows read the same session. Contacts are
shared with the other stations of a multi-operator entry in N1MM's contact
message, so an N1MM station on the same network sees them too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
