The QTC window put nothing on the air on RTTY except the lines themselves,
so the operator typed the rest into the digital window's transmit pane and
copied the lines by hand. N1MM sends a message for each step and fills the
lines in from a click. Both are here now, with N1MM's messages, N1MM's
defaults and N1MM's settings behind them.
The messages, all of them settings in the QTC window's setup area:
- RX Ready, `WAERXReadyText`, `{ENTERLF}I AM QRV BK`
- All Agn, `WAEAllAgnText`, `{ENTERLF}ALL AGN ALL AGN BK`
- Agn n, `WAEAGNText`, `{ENTERLF}AGN QTC: $ $ $ `, where `$` is the line
- Save, `WAESaveQTCText`, `{ENTERLF}R R R ALL OK BK`
- R U QRV, `WAERUQRVText`, `{ENTERLF}R U QRV BK`
- Save, reading traffic out, `WAESSaveQTCText`, `{ENTERLF}GL DE {MYCALL}`
Each keys the transmitter, sends the text and drops it again, and an empty
one sends nothing. The line spacing default is N1MM's `{ENTERLF}` rather
than `{ENTER}`, which was wrong.
The buttons: R U QRV and Snd Hdr were hidden while reading traffic out on
RTTY, though that is where N1MM starts — R U QRV is the first button
pressed. All Agn is new, and so is the S button on each line, which strikes
a line through a QTC that arrived too broken to read so the rows after it
keep their places; Agn n clears the strike and asks for that line again.
Clicking a line in the digital window fills the next row, which is how the
series is copied on RTTY: the other station sends the header and all ten
lines in one transmission. A click anywhere in a line hands the whole line
to the QTC window, which reads the time, the callsign and the serial number
out of it by shape and flashes the line to show it was taken. A line that is
not a QTC is left to mean what a click always means there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0157i7PiZyqBkquxS9A6FTdQ
N1MM's Send All: the whole series as one message — the heading, every
line with the operator's spacing between them, then the ending, with
`{TX}` and `{RX}` around it so it keys the transmitter and drops it
again. The shape is N1MM's, from `QTCWindow.cs:3609`. A line is the three
fields joined with hyphens, which is how N1MM writes them, and Snd n
sends one line again for a station that missed it.
One message rather than a button per line because a series is close to a
minute of transmission at 45 baud: the type-ahead buffer holds it and
paces the engine.
Three settings with N1MM's names and defaults — `WAESendAllHeadingText`,
`WAESendAllEndingText` and `WAESQTCSpacing` — on the QTC window's setup
dialog. `{ENTERLF}` is new to the expander and stands for a carriage
return and a line feed; `{QTC}` is filled in by the window, which is the
only place that knows which series is going out.
The messages are tested as text. Nothing has gone on the air.
Left out: N1MM's four SSB recordings, which need a voice keyer, and its
RTTY messages for the station taking traffic down, which are typed into
the digital window's transmit pane here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PdAYHcdRktqKry7nk414TU
Reading the source again after this was tried turned up several things it had
wrong or left out.
The TU message went out only when reading a series out. N1MM sends it whichever
way the traffic went, and lets it name the series: {QTC} in it stands for the
header, so TU {QTC} 73 goes out as TU QTC 3/10 73.
The RX Ready button was hidden while sending and sent nothing on CW. It is
N1MM's QRV button: reading out it says R U QRV and keys QRV?, taking down it
says QRV and keys QRV.
The fields were asked for again with shift and Enter, which was made up. N1MM
uses the number keys, and writes them under the lines: 1, 2, 3 and 4 send the
time, call, serial or header of the last line again while reading out, and
shift with 1, 2 or 3 asks for that field while taking down.
The buttons now carry N1MM's names for the direction the traffic is going —
R U QRV, Snd Hdr, Snd1 to Snd10, Exit reading out; QRV, Hdr Agn, Agn1 to Agn10,
Exit taking down — and the Cfm column and Clear are hidden while reading out,
as N1MM hides them. The separate Send Hdr button is gone: N1MM has one button
there that sends the header one way and asks for it the other.
The log window gained N1MM's QTC? column for a contest that carries QTC
traffic. It holds the series, so a QTC row can be told from a contact; before
this a QTC row read as an ordinary one with odd values in the report columns.
Driven under Xvfb against a fake cwdaemon. Reading out: QRV?, QTC 3/2,
2319 DL7GGG 03, then 2319 and QTC 3/2 from the number keys, and
TU QTC 3/2 73 on Exit. Taking down: QRV, AGN TIME, AGN CALL.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
The QTC window took traffic down and read it out of the log, but nothing left
the window: on CW the operator had to send the lines by hand. It now puts them
on the air through the entry window's keyer, the way N1MM's QTC window sends
through its own entry window, so the same macros are expanded and the same
transmitter is pointed at first.
Sending a series: Send Hdr keys the header, Send1 to Send10 key one line each —
the time, the callsign and the serial number — and Close keys the TU message
when one is set. Taking one down: Hdr Agn asks for the header again, and shift
with Enter in a box asks for that one field again and clears it.
The messages and their defaults are N1MM's: AGN TIME, AGN CALL, AGN SERIAL, the
hard-coded HDR AGN with its two spaces, and a TU that sends nothing until the
operator writes one. So is the field spacing, written N1MM's way with S for a
space. All five are in Setup, where the note about the missing settings used to
be.
Nothing is sent on SSB or RTTY. N1MM plays four recordings on SSB and sends
RTTY from its digital window, and there is neither here, so on those modes the
buttons move the cursor as before. RX Ready sends nothing on any mode, because
a recording is all N1MM ever sends from it. Serial numbers go out as digits:
N1MM can send cut numbers and nothing here does, in any message.
Driven under Xvfb against a fake cwdaemon, in a WAE CW contest with four
contacts logged. Sending, it keyed QTC 1/2, 2257 DL1AAA 01, 2257 DL2BBB 01,
then QTC 2/2 with its two lines and TU DE W1ABC on close. Receiving, HDR AGN,
AGN TIME, AGN CALL and AGN SERIAL.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
erikbrockoandClaude Opus 5