N1MM's Send All: the whole series as one message — the heading, every
line with the operator's spacing between them, then the ending, with
`{TX}` and `{RX}` around it so it keys the transmitter and drops it
again. The shape is N1MM's, from `QTCWindow.cs:3609`. A line is the three
fields joined with hyphens, which is how N1MM writes them, and Snd n
sends one line again for a station that missed it.
One message rather than a button per line because a series is close to a
minute of transmission at 45 baud: the type-ahead buffer holds it and
paces the engine.
Three settings with N1MM's names and defaults — `WAESendAllHeadingText`,
`WAESendAllEndingText` and `WAESQTCSpacing` — on the QTC window's setup
dialog. `{ENTERLF}` is new to the expander and stands for a carriage
return and a line feed; `{QTC}` is filled in by the window, which is the
only place that knows which series is going out.
The messages are tested as text. Nothing has gone on the air.
Left out: N1MM's four SSB recordings, which need a voice keyer, and its
RTTY messages for the station taking traffic down, which are typed into
the digital window's transmit pane here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PdAYHcdRktqKry7nk414TU
Reading the source again after this was tried turned up several things it had
wrong or left out.
The TU message went out only when reading a series out. N1MM sends it whichever
way the traffic went, and lets it name the series: {QTC} in it stands for the
header, so TU {QTC} 73 goes out as TU QTC 3/10 73.
The RX Ready button was hidden while sending and sent nothing on CW. It is
N1MM's QRV button: reading out it says R U QRV and keys QRV?, taking down it
says QRV and keys QRV.
The fields were asked for again with shift and Enter, which was made up. N1MM
uses the number keys, and writes them under the lines: 1, 2, 3 and 4 send the
time, call, serial or header of the last line again while reading out, and
shift with 1, 2 or 3 asks for that field while taking down.
The buttons now carry N1MM's names for the direction the traffic is going —
R U QRV, Snd Hdr, Snd1 to Snd10, Exit reading out; QRV, Hdr Agn, Agn1 to Agn10,
Exit taking down — and the Cfm column and Clear are hidden while reading out,
as N1MM hides them. The separate Send Hdr button is gone: N1MM has one button
there that sends the header one way and asks for it the other.
The log window gained N1MM's QTC? column for a contest that carries QTC
traffic. It holds the series, so a QTC row can be told from a contact; before
this a QTC row read as an ordinary one with odd values in the report columns.
Driven under Xvfb against a fake cwdaemon. Reading out: QRV?, QTC 3/2,
2319 DL7GGG 03, then 2319 and QTC 3/2 from the number keys, and
TU QTC 3/2 73 on Exit. Taking down: QRV, AGN TIME, AGN CALL.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
The QTC window took traffic down and read it out of the log, but nothing left
the window: on CW the operator had to send the lines by hand. It now puts them
on the air through the entry window's keyer, the way N1MM's QTC window sends
through its own entry window, so the same macros are expanded and the same
transmitter is pointed at first.
Sending a series: Send Hdr keys the header, Send1 to Send10 key one line each —
the time, the callsign and the serial number — and Close keys the TU message
when one is set. Taking one down: Hdr Agn asks for the header again, and shift
with Enter in a box asks for that one field again and clears it.
The messages and their defaults are N1MM's: AGN TIME, AGN CALL, AGN SERIAL, the
hard-coded HDR AGN with its two spaces, and a TU that sends nothing until the
operator writes one. So is the field spacing, written N1MM's way with S for a
space. All five are in Setup, where the note about the missing settings used to
be.
Nothing is sent on SSB or RTTY. N1MM plays four recordings on SSB and sends
RTTY from its digital window, and there is neither here, so on those modes the
buttons move the cursor as before. RX Ready sends nothing on any mode, because
a recording is all N1MM ever sends from it. Serial numbers go out as digits:
N1MM can send cut numbers and nothing here does, in any message.
Driven under Xvfb against a fake cwdaemon, in a WAE CW contest with four
contacts logged. Sending, it keyed QTC 1/2, 2257 DL1AAA 01, 2257 DL2BBB 01,
then QTC 2/2 with its two lines and TU DE W1ABC on close. Receiving, HDR AGN,
AGN TIME, AGN CALL and AGN SERIAL.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
N1MM keeps them on a Setup tab inside the window; here they are a dialog behind
a right-click, which suits a window this size better. Four of them, with N1MM's
own defaults: how many QTCs a series carries, whether the RX Ready and Cfm steps
are stopped at on the way through, and whether Hdr Agn and Agn clear what they
are asking for again.
Each one changes what the window does. The series count is passed to the search
for contacts worth reporting, the two skip settings are the focus order, and the
two clear settings are what the Agn buttons do. The Cfm buttons also disappear
when a RTTY station is reading its own log out, which is what N1MM does with
them.
N1MM's remaining QTC settings are all about putting traffic on the air — the CW
messages for Agn and TU, the field spacing, the four SSB recordings, the RTTY
templates — and nothing here transmits, so they are left out rather than shown
as settings that do nothing. The dialog says so where the operator will look.
The right-click menu needed a background on the panel to come up anywhere but
over a control: a panel with no background is not hit-tested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ctrl+Z opens the QTC window for the station being worked, which is the key N1MM
puts it on, and the window is laid out the way N1MM lays it out: the header,
ten lines of time, callsign and serial number, an Agn and a Cfm button beside
each, Clear, Close and Cancel underneath, and the same colours — green for a
line that will be saved, red for one still empty, yellow for one that cannot be
read. Enter and Tab move forward and space moves within a line, so a line can be
walked while listening to it.
Sending, the lines are filled from the log and cannot be edited: the contacts
not reported to anybody yet, oldest first, never the station being worked, and
never past the ten any station may have. The rule for what has been reported is
N1MM's — a contact counts as reported when a QTC row carries its call and the
serial we sent it — so the pair is kept in the row the way N1MM keeps it.
Which way traffic goes is not the operator's choice on CW and SSB: Europe
receives and the rest of the world sends. On RTTY it goes both ways, and there
the window carries a switch. That is the one piece of the workflow that is ours
rather than N1MM's, which toggles a QTC mode outside the window instead.
Nothing here transmits. N1MM sends the lines on CW and RTTY and plays recorded
voice messages on SSB; we have no QTC message templates, no voice keyer and no
digital window, so Agn, Cfm and RX Ready move the cursor and the operator sends
by hand.
Running it caught what the tests could not: focus set in the constructor does
not stick, so the first thing typed into a freshly opened window was dropped and
every field after it took the value of the one before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
