WAE is two contests in one. The QSOs are scored like any other, except that a
multiplier is worth four on 80 metres, three on 40 and two on the high bands, so
Multiplier grew a weight and ScoreTally sums weights rather than counting.
Europe works the rest of the world and the rest of the world works Europe; on
RTTY that rule is dropped and everybody works everybody.
The other half is QTC traffic: one station reads back contacts it has already
made, ten to a series, and every line is a point for both stations. Those lines
live in the log as rows of their own, exactly where N1MM puts them — Exchange1
says SQTC or RQTC, the reported contact's time, call and number go in the sent
report, received report and sent number columns, and the series in misc text.
So a log written by either program opens in the other with its traffic intact.
A QTC row is not a worked station: Contest.IsContact says so, and ContestLog
keeps such rows out of the dupe index and the multiplier index while still
counting their points. Cabrillo writes them as QTC: records.
Checked against eight real WAE logs rather than against my own reading of the
rules. Points agree with N1MM on all eight, to the contact. Weighted
multipliers agree on the six logs from 2022 on; the two older ones differ only
where the country file has since changed its mind, and in one place on purpose:
N1MM counts a callsign it cannot place as a multiplier with an empty value.
That comparison turned up two bugs of ours. A KG4 call is Guantanamo Bay only
when it is three or five characters long — KG4NE is, KG4IGC is an ordinary US
call — and the country file cannot say so, so every program that reads it
carries the rule. And Callsign is a record holding a list of modifiers, so the
generated equality compared that list by reference and two parses of one call
came out different.
Entering QTCs while operating is not there yet; the window is next.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
CQWWRTTY resolved to the built-in CQ WW with the mode set to digital, and then
scored it as though it were the CW running: a contact inside your own country
worth nothing, two multiplier types, and CQ-WW-SSB in the Cabrillo header. Every
one of those is wrong for RTTY, and wrong quietly, which is the worst way.
RTTY is a different contest wearing the same name. Every contact scores — 1
inside your own country, 2 on your own continent, 3 off it. The exchange carries
the state or province after the zone, and that is a third multiplier per band.
A station outside the US and Canada sends DX there, so the box is not required
and DX brings no multiplier.
The state box being optional is deliberate: most of the log is DX stations, and
holding up an entry for a box that will hold DX costs more than it is worth.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The box names in EntryWindowInfo are N1MM's LogItem.LogItemNameType members.
We read four of them under names that are not in that enum, so a file naming
its section box SectionText got no section box at all, and a zone or a power
box was dropped whatever it was called.
SectionText, CQZoneText and PowerText are now read. SectText stays as well: it
is not one of N1MM's names but files in the wild use it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
N1MM's format, so a file published for a contest is read as it is: # comments,
!!Order!! naming the columns of the lines after it, semicolons in preference to
commas so user text can hold a comma, and a default column order for a file
that names none. The directives that change what is stored are acted on;
!!Order!! can appear again part way through, because these files are usually
several files stuck together.
Leaving the callsign box fills what the file knows into the exchange boxes that
are still empty. A box with something in it is left alone: what the station
actually sends beats what somebody published months ago. The zone comes from
the CqZone or the ITUZone column depending on which the contest asks for, and a
file with no Sect falls back to State.
The check window's two missing columns are in. History lists matching calls
from the file. Exchange is not about callsigns at all: it offers the values the
exchange box with the cursor in it can hold, which is what N1MM's exchange pane
does — it searches the contest's list of valid exchanges, not the log.
CheckCandidate.Call is now Text, because an exchange value is not a call.
The section-validating directives are read and passed over rather than acted
on. Acting on them means holding N1MM's section lists and its rules about
retired sections, and getting that wrong throws away good data.
Running it caught what the unit tests could not: the exchange was filled and
scored but the boxes on screen still looked empty, because nothing resynced
them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things stopped it.
A contest is keyed by ContestNR, not by ContestID. ContestID is only the
ContestInstance table's primary key; DXLOG.ContestNR refers to ContestNR, which
is what N1MM's SQLWhereString matches on. The two agree in a fresh log and
drift apart in one that has been used for a while, so we were reading one
contest's header with another contest's contacts. In a real log of 56284
contacts, joining on ContestID disagreed with the contact's own ContestName
52029 times; joining on ContestNR disagreed 109 times.
N1MM names a contest per mode: CQWWCW, CQWWSSB, CQWWRTTY, never plain CQWW.
Our contests now use those names, and N1mmContestNames turns one back into a
contest and a mode when a log is opened. The name carries the mode, so it beats
the ModeCategory column. Plain CQWW still opens, because older versions wrote
it that way.
The log columns were sized by counting characters, which was too narrow for the
headers: those are drawn in the theme's font, not the grid's monospace. The
grid sizes them now, with the character count as a floor so a column of short
values does not collapse.
Bandmap spots now age from when they arrived rather than from the time written
in them. A node with a wrong clock, or one replaying its backlog on connect,
emptied the bandmap as fast as it filled it.
Checked by opening a real 56284-contact N1MM log under Xvfb and reading the
contest and contacts back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ctrl+Y from the entry window, or Enter on a row in the log, opens the whole
contact in one dialog. It reaches the fields the log has no column for: QSX
frequency, name, QTH, comment, grid, power, radio number, run position, and the
country and WPX prefixes. Previous and Next walk the log without closing and
offer to save first.
The dialog checks values through the same QsoEditor the log columns use, so a
zone the contest will not take is refused the same way in both places.
QsoEdit now names the field that was refused, so the dialog can put the cursor
back in the right box, and QsoEditor.ApplyAll changes several fields at once.
Points and the multiplier flags are shown but not editable. They are worked out
from the rules every time the log changes, so a typed value would be lost on
the next edit. N1MM lets you type them; we do not, rather than offering a box
that does nothing.
A contact's own country prefix now wins over the country file when scoring.
Without this, correcting the country in the dialog would change what the log
shows and what Cabrillo says, but not the score.
LoggingSession.Update now broadcasts the change like Edit does, so a contact
saved from the dialog reaches the other stations.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Checked by opening a log this program wrote in N1MM 1.0.11031. Three things it
rejected:
- a log naming a contest with no row in the Contest table throws "No current
row" in Contest.FromRow, so the definition row is written whenever a contest
is opened;
- an empty overlay category is answered with "Invalid Overlay Category:", so an
entry with no overlay now says "N/A", and the dialog offers N1MM's list;
- the sent exchange omits the report, which is what N1MM's own contest dialog
asks for.
With those three fixed N1MM opens the log and shows the contacts.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ARRL DX, IARU HF, Sweepstakes, RTTY Roundup, NAQP and general logging join
CQ WW and CQ WPX. The Cabrillo QSO line is now built column by column by the
contest, because Sweepstakes puts the callsign after the serial number where
everyone else puts it first.
User-defined contests read the subset of N1MM's .udc settings that covers the
exchange, the dupe rule, points and up to three multipliers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Frequencies, bands, modes, callsigns, grid squares and the country file live in
Nonemm.Core. Nonemm.Contests holds the scoring engine and CQ WW and CQ WPX.
Nonemm.Storage writes N1MM's DXLOG schema, and Nonemm.Formats writes Cabrillo
3.0 and reads and writes ADIF.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
