N1MM's log window has two panes. The lower one lists every contact already
logged with the call in the callsign box, on any band and in any mode, so an
apparent dupe can be read off the screen rather than looked for.
EarlierContacts.Matching holds the rule, so it is unit-tested without a
window: three characters before anything is listed, a call that holds what is
typed, `*` for any run of characters and `?` for one, the grid square instead
when nothing is typed, ordered by call, mode, band and time, and fifty at
most. That is N1MM's DupeSQL, except that N1MM passes `?` to SQLite as a plain
character, which finds nothing.
The two grids share their columns, because a value in the pane has to sit
under the column it belongs to. Each column is now as wide as the longest
value it can hold, measured in the font it is drawn in, and the last column
takes what is left over. The values and the header are in different fonts, so
each is measured on its own. This also settles the column widths, which used
to change as rows scrolled into view.
A DataGrid does not pass its own font down to its cells, so the cell font is
set in a style. Without that the cells draw larger than the width measured for
them and every column is a character short.
Looked at under Xvfb with a call typed: the pane lists the two contacts that
hold it, under columns that line up with the log above.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RoGtneMQaz4M9w7Kk49AVD
The menu tree comes from N1MM's EntryWindow.Designer.cs: File, Edit, View,
Tools, Config, Window, with the items under the names N1MM gives them. The
window list moved out of View into Window; the call history file moved from
Config into File > Import. Ctrl+W, Ctrl+L and Ctrl+M now work, so the keys
printed in the menu are real. Two commands that had no menu item before:
the CW and SSB function key definitions, and the QTC setup area.
The rest of the Edit menu:
- Ctrl+N asks for a note and puts it in the comment of the contact in the
boxes, or of the last logged contact when nothing is typed.
- Edit Current Contact opens the Edit Contact form over what is typed but
not logged. Update hands the values back to the entry boxes.
- Ctrl+Q and Ctrl+A load a logged contact into the boxes and paint them
pale yellow. Enter writes the change back, Esc puts back what was being
typed, and stepping forward past the newest contact leaves quick edit.
- Ctrl+U raises the received serial, or a numeric exchange box when the
contest has no serial.
- Ctrl+F shows the call being typed in the log window, then the next
contact with that call.
RadioPosition is now OperatingPosition: it is the operator at one radio,
not a place on a band.
Looked at under Xvfb on a 3775-contact log: quick edit back and forward,
Esc, the note dialog, find, and Edit Current Contact putting a zone back
into the entry boxes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
LoggingSession mixed two things: the contest, which one station has one of,
and what the operator is typing, which belongs to a radio. It is now
ContestSession and RadioPosition. Two positions share one log, one score and
one run of serial numbers, so a station worked on radio 1 is a dupe on radio 2.
Frequency, mode, split, what is typed and whether you are running belong to
each radio on its own.
A second radio opens a second entry window. It has no menu of its own: it is
another view of the same contest, not another program. Only the window for
radio 1 opens the database and the connections.
Ctrl+Tab moves the operator to the other radio and the keyboard follows.
Ctrl+Shift+Tab puts both radios in the headphones.
OtrspBox speaks OTRSP to an SO2R box over a serial port: TX1/TX2 for the key,
RX1/RX2 and RX1S for the headphones, AUXnnn for an output line. It follows the
active radio, and every message points the box at this radio before keying, so
a message cannot go out of the radio the operator has just left. A command that
would change nothing is not sent, because the box works relays; N1MM does the
same. The box takes a Stream, so what it sends is tested without a serial port.
Still missing: alternating CQ, and voice keying on the second radio.
Looked at under Xvfb with two fake radios, one of them split: both windows up,
radio 1 showing 14008.00 into 14020.0, radio 2 on 14030.00, Ctrl+Tab moving the
keyboard between them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things stopped it.
A contest is keyed by ContestNR, not by ContestID. ContestID is only the
ContestInstance table's primary key; DXLOG.ContestNR refers to ContestNR, which
is what N1MM's SQLWhereString matches on. The two agree in a fresh log and
drift apart in one that has been used for a while, so we were reading one
contest's header with another contest's contacts. In a real log of 56284
contacts, joining on ContestID disagreed with the contact's own ContestName
52029 times; joining on ContestNR disagreed 109 times.
N1MM names a contest per mode: CQWWCW, CQWWSSB, CQWWRTTY, never plain CQWW.
Our contests now use those names, and N1mmContestNames turns one back into a
contest and a mode when a log is opened. The name carries the mode, so it beats
the ModeCategory column. Plain CQWW still opens, because older versions wrote
it that way.
The log columns were sized by counting characters, which was too narrow for the
headers: those are drawn in the theme's font, not the grid's monospace. The
grid sizes them now, with the character count as a floor so a column of short
values does not collapse.
Bandmap spots now age from when they arrived rather than from the time written
in them. A node with a wrong clock, or one replaying its backlog on connect,
emptied the bandmap as fast as it filled it.
Checked by opening a real 56284-contact N1MM log under Xvfb and reading the
contest and contacts back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ctrl+Y from the entry window, or Enter on a row in the log, opens the whole
contact in one dialog. It reaches the fields the log has no column for: QSX
frequency, name, QTH, comment, grid, power, radio number, run position, and the
country and WPX prefixes. Previous and Next walk the log without closing and
offer to save first.
The dialog checks values through the same QsoEditor the log columns use, so a
zone the contest will not take is refused the same way in both places.
QsoEdit now names the field that was refused, so the dialog can put the cursor
back in the right box, and QsoEditor.ApplyAll changes several fields at once.
Points and the multiplier flags are shown but not editable. They are worked out
from the rules every time the log changes, so a typed value would be lost on
the next edit. N1MM lets you type them; we do not, rather than offering a box
that does nothing.
A contact's own country prefix now wins over the country file when scoring.
Without this, correcting the country in the dialog would change what the log
shows and what Cabrillo says, but not the score.
LoggingSession.Update now broadcasts the change like Edit does, so a contact
saved from the dialog reaches the other stations.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Double-click a cell in the log window to change it. The columns follow the
contest exchange instead of being fixed in the XAML, so CQ WW gets a Zone
column and Sweepstakes gets Nr, Prec, Ck and Sec.
QsoEditor holds the column list and applies one field edit. Validation comes
from the ExchangeFieldKind the contest declared: a CQ zone is 1 to 40, an ITU
zone 1 to 90, a section is looked up in the ARRL list, a grid must parse.
A refused edit returns the reason and leaves the log alone, so the cell
reverts. Changing the callsign runs the country lookup again.
Delete, or the right-click menu, removes the selected contact after a
confirmation. Either way the log is rescored, so a multiplier the removed
contact held passes to the next contact that claims it.
Both go out to the other stations in N1MM's own messages: contactreplace
carries oldcall and oldtimestamp, contactdelete names the contact. An incoming
edit or delete is matched by contact id first, falling back to call plus
timestamp because N1MM does not know our ids.
Country, continent and the two prefixes were filled in twice, once when
logging and once when editing. They now come from CountryFields.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The entry window types contacts and colours them as they are typed; the log,
check, bandmap, score and packet windows read the same session. Contacts are
shared with the other stations of a multi-operator entry in N1MM's contact
message, so an N1MM station on the same network sees them too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
