ericek111
648da1918a
N1MM keeps them on a Setup tab inside the window; here they are a dialog behind a right-click, which suits a window this size better. Four of them, with N1MM's own defaults: how many QTCs a series carries, whether the RX Ready and Cfm steps are stopped at on the way through, and whether Hdr Agn and Agn clear what they are asking for again. Each one changes what the window does. The series count is passed to the search for contacts worth reporting, the two skip settings are the focus order, and the two clear settings are what the Agn buttons do. The Cfm buttons also disappear when a RTTY station is reading its own log out, which is what N1MM does with them. N1MM's remaining QTC settings are all about putting traffic on the air — the CW messages for Agn and TU, the field spacing, the four SSB recordings, the RTTY templates — and nothing here transmits, so they are left out rather than shown as settings that do nothing. The dialog says so where the operator will look. The right-click menu needed a background on the panel to come up anywhere but over a control: a panel with no background is not hit-tested. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
6.3 KiB
What is not finished, and what has not been tested
Two separate lists. A feature can be finished and untested, or half-built and exercised every day. Written 2026-08-27.
Never run against the real thing
Everything below is written from a published protocol or from N1MM's source and tested against a fake that speaks the same protocol. A fake agrees with whatever the person who wrote it believed, so these are the places where a wrong belief is still sitting there undiscovered.
| What | Tested against | What has never happened |
|---|---|---|
RigctldRadio |
a stand-in for rigctld over a real socket |
no real rigctld, no real radio. The extended answer format, the + prefix and the split commands are from the documented protocol. If the format is wrong, nothing works rather than something being subtly off — check this first. |
OtrspBox |
a MemoryStream, checking the bytes |
no real SO2R box. Command forms are from N1MM's N1MMPort.cs. |
ClusterClient |
a node fake over a real socket, sending the telnet negotiation, the login prompt and spot lines | no live cluster node. Which nodes send bare CR, and which send option negotiation, is guessed from N1MM's code. |
StationNetwork |
the message format, round-tripped | no second station, and no N1MM on the same network. |
CwDaemonSender |
the UDP messages, and a fake daemon that answers the <ESC>h reply request |
no cwdaemon, no radio keyed. |
WinkeyerSender |
the status-byte reader, on its own | no test of the serial side, and no WinKeyer. The host-mode open sequence is from the WinKeyer datasheet; the status bits are from N1MM's Winkey.cs. |
The Cabrillo output has not been put in front of a contest sponsor's robot.
Half-built
Voice keying. MessageSender was written to cover a voice keyer playing a
recording, and nothing implements it. No DVK support either, so the second radio
of an SO2R station cannot call CQ by voice. Alternating CQ therefore works on CW
only, though nothing in it is CW-specific: a voice keyer that reports when the
recording has finished would drive it as it stands.
Alternating CQ does not restart itself after a contact. Escape stops it, and it has to be started again with Ctrl+B. N1MM carries on calling after the QSO is logged.
Call history: the section-validating directives. !!Validate50State!!,
!!ValidateArrlSection!!, !!MapOnSection!! and !!GTA2GH_NT2TER!! are read
and passed over. Acting on them means holding N1MM's section lists and its
rules about which sections are retired, and getting that wrong throws away good
data. The file is read without them.
The QTC window does not transmit. Ctrl+Z opens it and traffic goes into the log, but N1MM sends the QTC text itself: the lines on CW and RTTY, and recorded voice messages for QRV, Agn, Cfm and TU on SSB. Here the Agn, Cfm and RX Ready buttons only move the cursor. What is missing under it is the message templates for QTC traffic, a voice keyer, and the digital window.
The QTC setup covers the window, not the sending. Right-click ▸ Setup has the four settings that change how the window behaves, with N1MM's defaults. What is not there is everything about putting QTCs on the air: N1MM's CW messages for Agn and TU, its SQTC field spacing, its four SSB recordings, and its RTTY message templates. Those wait on a transmit path.
Two WAE numbers do not agree with N1MM, both from 2020 and 2021 logs. The
disagreements are the country file of the day, not the rules: 4U1A counted as
4U1V then and as OE in today's wl_cty.dat, KP2BH counted as KP2 then
and is listed as a US call now, and China was not split by call area yet. The
2022 to 2025 logs agree to the contact. One difference is ours on purpose: N1MM
counts a callsign it cannot place — D1M — as a multiplier with an empty
value, and we do not.
Digital modes. A contact can be logged as RTTY or another digital mode, and the contest rules score it, but there is no digital window: no decoding, no transmitting, no interface to fldigi, MMTTY or similar.
Contest coverage. Eight families are built in, plus whatever .udc files
are in the user-defined folder. N1MM ships well over a hundred. Opening a log
from a contest that is in neither place fails with the contest name, which is
the right answer but it is still a wall.
Most of what is missing does not need code. A contest whose exchange is a
report and one value, scored by band, mode, continent or country, and counted
by country, zone, section or prefix, is a .udc file, and the file published
for N1MM is read as it is. Code is for the ones .udc has no words for: WAE
needs QTC traffic, IOTA needs island references as multipliers, and CQ WW RTTY
needed a third multiplier and its own points table because it shares a name
with the CW and SSB running of the contest.
What .udc cannot say here yet: an exchange that differs by the other
station's country (the OK/OM district against a serial number from everyone
else), points that depend on a zone or a distance, and multiplier sources
beyond country, prefix, zone, section, exchange, grid and continent.
Known rough edges
The log window's column widths are the grid's own automatic sizing with a character-count floor. A column can change width as rows scroll into view.
Contacts arriving over the station network are applied from the socket
thread, and AppSession.TakeFromNetwork reopens the whole contest to do it.
That is correct but heavy, and it discards what is typed in an entry window on
another radio.
The band plan covers 160M to 2M only. 60M and everything above 2M get no CW, digital or phone shading on the bandmap, because N1MM's own numbers for those bands contradict themselves — its CW top for 1.25M is below its phone start, and its 70CM CW top is above the band. Config ▸ Sub bands cannot add a band that has no default.
Available mults and Qs is only as good as the bandmap. It lists what is spotted, so a multiplier nobody has spotted is not there. N1MM's window also shows the mults a contest has and nobody has worked, which needs a list of every multiplier the contest counts. Only the section and state lists are held here, so the zone and country lists would have to come from the country file first.
Two entry windows and one keyer. The SO2R box is told which radio to key before each message, but nothing stops both radios sending at once if the operator asks them to.